A Call Doesn't Hang Up, Has Background Noise, or Has No Connect Beep

Calls

When a call stays connected after the caller hangs up, carries voices or noise in the background, or an agent hears no beep when a caller connects, the cause is usually outside Trackdrive's control or in an agent status setting. This article walks through each one and what you can check yourself.

Trackdrive Ends the Call When It Receives the Hang-Up

What you see: the caller says they hung up, but the agent or buyer stays on the line for a while.

Where to check: Trackdrive ends the call when the caller's phone carrier tells it the caller hung up. Open the call and read its log, which shows when each hang-up arrived. If the hang-up arrived late, the delay was before it reached Trackdrive.

The fix: hang up from the agent's side when the caller is gone. If many calls show the same delay, see the next section.

Example: a caller hangs up, but the agent stays on an open line for a minute. The call's log shows the caller's hang-up arriving a minute after the caller says they left, so the delay happened before the hang-up reached Trackdrive.

A Carrier That Never Sends the Hang-Up

What you see: on some calls, at random, the line stays open after the caller is gone, and the call's log shows no hang-up from the caller.

Where to check: whether a carrier sent the hang-up can be confirmed only from the carrier's signalling, which Trackdrive support reads.

The fix: contact Trackdrive support with the call id and the time of the call.

Example: one call in twenty from the same source stays open after the caller is gone, and those calls' logs show no hang-up from the caller. Support reads the carrier's signalling for one of those calls to confirm the hang-up was never sent.

Background Voices on the Caller's Line

What you see: the agent hears voices or call center noise behind the caller.

Where to check: Trackdrive does not add sound to a call. Noise behind the caller comes from the caller's own line or surroundings.

The fix: there is nothing to change in Trackdrive. If the noise is on every call from one source, raise it with that source.

Example: agents hear a busy call floor behind callers from one traffic source and not from others. The noise is on that source's side, so the source is the one to raise it with.

No Beep When a Caller Connects

What you see: an agent hears a beep each time a caller joins, but some agents hear no beep, even after resetting or rebooting their phone.

Where to check: the connect beep plays only on calls whose Provider shows as Trackdrive on the call's page, and only when the agent's status has Play Conference Enter Sound? on. When the status has Announce Lead's Name To Agent? on, the agent hears the lead's name instead of the beep on each call that matches the filters set under that switch; a call that doesn't match them gets the beep. With no filters set there, every call gets the name. Rebooting a phone doesn't change any of this.

The fix: open the agent status the agents use and turn on Play Conference Enter Sound?. Check whether the agents who hear no beep are on calls with another provider, or on a status with Announce Lead's Name To Agent? on whose filters their calls match.

Example: two statuses look alike, but only one has Play Conference Enter Sound? on. Agents on the other status hear no beep.

When to Contact Support

If none of these explains it, contact Trackdrive support with the call id and the time of the call.

Contact TrackDrive

Questions?

We're here to help. Reach out and a Voice Marketing Cloud Specialist will get back to you.

Email support@trackdrive.com
Request A Demo

Request A Demo.

See how you can improve your marketing and the customer experience with the Voice Marketing Cloud.

Request a demo